The Splicer is a specially designed all-in-one wire stripper and automatic wire nut applicator that will fit all sizes and makes of cordless drills.

By pushing the wires into the stripping device located at the front of the tool and then pulling the wires out, the user will have successfully stripped the ends of the wires at the exact length necessary for a proper splice - strips 3 wires simultaneously!

After stripping the wires the user will guide the stripped ends into the wire-nut dispensing chamber where a wire nut awaits. When all the wires are firmly held within the wire nut the user will engage the drill by depressing the switch. This action will spin the chuck, but at the same time will spin the wire nut onto the wires, thus giving a solid splice. The user will then remove the wires with a wire nut attached and a new wire nut will instantly replace the used one and be ready for the next splice.

The quick action of the Splicer will increase productivity by the user not having to fumble for wire nuts. At the same time it will eliminate any pain the user receives on the fingers from the slow, continual and repetitive twisting of wire nuts. This will be especially appealing during the winter months.

The user and the employer will be assured that each and every splice will be a professional and permanent splice, unlike many manual splices where arcing can occur due to loose splices that can potentially cause a fire. This tool will help do-it-yourselfers who would like to tackle their own small home wiring tasks to feel confident that a proper splice can be achieved.

Lastly, a holster to carry the Splicer will be specifically designed to slip on to any construction belt. The Splicer will then remain balanced in the holster, enabling the user to access the tool with ease and efficiency.